If you have any questions, please contact us.
1X main unit (Frame)
1X main unit (working base)
2X Fence baffle
1X control box
1X A axis
1X Sinal cable for A axis
1X 25pin Parallel lines
2X cutter 2*6mm
2X cutter 3*6mm
10X 4*7mm round head
6X 4*10mm black Inner six angle screw with nut
8X 5*20mm black Inner six angle screw
4X 5*8mm Flat Philip’s head screw with nut and gasket
8X 6*24mm BALCK FLAT Inner six angle screw
12X Aluminium fastener
1X 13-15# Wrench
1X 14-17# Wrench
2X six angle Wrench(3mm)
2X six angle Wrench(4mm)
1X Teflon tape
2X Fuse (5A)
1X Power cable
X axis / Y axis :1605 Ball Screws; Z axis:1204 Ball Screws
X axis / Y axis / Z axis：High intensity Chromeplate shaft
Stepping motor: 57 two-phase 3A 150N.cm
Outside dimension: 65*158mm
Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket
VOLTS, current, power: AC110V-220V/50Hz, 5A, 1.5KW VFD
Spindle speed : 24000 rpm
Max working frequency : 400Hz
Principal axis collet: ER11collet, Standard configuration :6mm
Nut Model: ER11-A
Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM
Lubrication way: lubricated by high grease
Repeat accuracy: 0.05mm
Spindle precision: radial beat acuities 0.03mm
Carving Instructions: G code
Communication interface: through USB connection with computer
Maximum Idle speed:1500mm/min
Working Speed : 50-1500mm / min (different material with different speed settings)
- 【ENGRAVING MACHINE PARAMETERS】(note: when you received this machine, please contact us to send you the detailed instruction and Mach3 software.) X,Y,Z Working Area : 600(Y)*390（X）*120(Z)mm; Outside dimension : 865*680*570mm（L*W*H）; Table size : 770（Y）*490（X）mm; Lathe structure : 6061/6063 Aluminum alloy; Max. Feeding height : ≤100mm.
- 【CONTROL BOX PARAMETERS】Operating; Voltage: AC220V; Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive; Computer connection: USB port; Command code: G code; Protection: Emergency stop button.
- 【PREMIUM MACHINE】The 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used to process aluminum alloy and hard wood, water cooling spindle works more stable and durable. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle.
- 【CAN CONNECT WITH COMPUTER】The mini router frame is movable. The machine can connect with computer as other external device such as printer , scanner… With the assist of the ROUTER 6040T, your design idea will be real-time display.
- 【WORK WITH VARIOUS MATERIALS】This Engraving machine can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood and soft metal, like aluminum, copper and silver to engrave them into 3D/2D works etc.